TB 9-6625-2351-35
NOTE
Perform (8) below ONLY if A6L401 (fig. 6) is 10 mH.
(8) If multimeter does not indicate a dc voltage equal to 2 V above the dc voltage
recorded in (5) above, perform b (1) below.
NOTE
Perform (9) below ONLY if A6L401 (fig. 6) is 20 mH.
(9) If multimeter does not indicate a dc voltage equal to the dc voltage recorded in
(5) above, perform b (2) below.
(10) Press TI LINE switch to OFF.
b. Adjustments
(1) Adjust A6R410 (fig. 6) for a dc voltage equal to 2 V above the dc voltage recorded
in (5) above (R).
(2) Adjust A6R410 (fig. 6) for a dc voltage equal to the dc voltage recorded in (5)
above (R).
19. Final Procedure
a. Deenergize and disconnect all equipment.
b. Annotate and affix DA label/form in accordance with TB 750-25.
33/(34 BLANK)
