Figure 1. Attenuation measurement (10 MHz to 18 GHz)

TB-9-4931-523-35 Attenuators Fixed and Variable (10 MHZ TO 40 GHZ) (General) Manual
Page Navigation
5

TB 9-4931-523-35

c. Connect equipment as shown in figure 1 and allow equipment to warm up for 1 hour

before performing paragraph 8 below (appendix B can be used as an alternate to paragraph

8 below.).

d. Connect equipment as shown in figure 1 and allow equipment to warm up 1 hour

before performing paragraph 9 below (appendix C can be used as an alternate to paragraph

9 below.).

e. Connect equipment as shown in figure 2 and allow equipment to warm-up for 3

hours before performing paragraph 10 below.

f. Connect equipment as shown in figure 2 and allow equipment to warm-up for 3

hours performing paragraph 11 below.

g. Connect equipment as shown in figure 3 and allow equipment to warm-up for 3

hours before performing paragraph 12 below.

h. Connect equipment as shown in figure 3 and allow equipment to warm-up for 3

hours before performing paragraph 13 below.

Figure 1. Attenuation measurement (10 MHz to 18 GHz) - equipment setup.