*TB 9-4931-540-35
SUPERSEDED COPY DATED 5 JULY 1993
DEPARTMENT OF THE ARMY TECHNICAL BULLETIN
CALIBRATION PROCEDURE FOR
HEWLETT-PACKARD, MODEL 3585B
Headquarters, Department of the Army, Washington, DC
12 March 2001
Approved for public release, distribution is unlimited.
REPORTING OF ERRORS AND RECOMMENDING IMPROVEMENTS
You can help improve this publication. If you find any mistakes or if you know
of a way to improve the procedure, please let us know. Mail your letter or DA
Form 2028 to: Commander, U. S. Army Aviation and Missile Command, ATTN:
AMSAM-MMC-LS-LP, Redstone Arsenal, AL 35898-5230. A reply will be
furnished to you. You may also send in your comments electronically to our e-
mail address: ls-lp@redstone.army.mil or by FAX (256) 842-6546/DSN 788-6546.
Paragraph
Page
SECTION
I.
IDENTIFICATION AND DESCRIPTION
Test instrument identification ............................
Forms, records, and reports ................................
Calibration description........................................
II.
EQUIPMENT REQUIREMENTS
Equipment required ............................................
Accessories required............................................
III.
CALIBRATION PROCESS
Preliminary instructions .....................................
Equipment setup .................................................
Counter and marker frequency...........................
Range calibration ................................................
Amplitude linearity .............................................
Reference level ....................................................
50Ω flatness.........................................................
1 MΩ flatness ......................................................
Noise ....................................................................
Low frequency response ......................................
Local oscillator sideband .....................................
Harmonic distortion ............................................
Bandwidth ...........................................................
Tracking generator flatness ................................
Final procedure ...................................................
__________
*This bulletin supersedes TB 9-4931-540-35, dated 5 July 1993.
