TB 9-4931-540-35
(12) Disconnect TRACKING GENERATOR output from 1 MΩ input and 50Ω
feedthrough termination.
(13) Press keys and enter values using ENTRY keys as listed in (a) through (h)
below:
(a)
ENTRY RECALL and then 1.
(b)
ENTRY blue shift and then ENTRY CAL ON.
(c)
ENTRY START FREQ to 1 kHz.
(d)
ENTRY STOP FREQ to 100 kHz.
(e) RBW-VBW-ST ENTRY RES BW to 300 Hz and wait for TI to calibrate (≈10
sec).
(f) RBW-VBW-ST ENTRY VIDEO BW to 10 kHz.
(g) RBW-VBW-ST ENTRY SWEEP TIME to 2 sec.
(h) ENTRY blue shift and then ENTRY CAL OFF.
(14) Repeat (2) through (12) above.
(15) Press keys and enter values using ENTRY keys as listed in (a) through (h)
below:
(a)
ENTRY RECALL and then 1.
(b)
ENTRY blue shift and then ENTRY CAL ON.
(c)
ENTRY START FREQ to 100 kHz.
(d)
ENTRY STOP FREQ to 10 MHz.
(e) RBW-VBW-ST ENTRY RES BW to 3 kHz and wait for TI to calibrate (≈10
sec).
(f) RBW-VBW-ST ENTRY VIDEO BW to 300 Hz.
(g) RBW-VBW-ST ENTRY SWEEP TIME to 2 sec.
(h) ENTRY blue shift and then ENTRY CAL OFF.
(16) Repeat (2) through (12) above.
(17) Press keys and enter values using ENTRY keys as listed in (a) through (f)
below:
(a) ENTRY RECALL and then 1.
(b) ENTRY START FREQ to 10 MHz.
(c) ENTRY STOP FREQ to 40.1 MHz.
(d) RBW-VBW-ST ENTRY RES BW to 3 kHz and wait for TI to calibrate (≈10
sec).
(e) RBW-VBW-ST ENTRY VIDEO BW to 300 Hz.
(f) RBW-VBW-ST ENTRY SWEEP TIME to 2 sec.
14
