SECTION II CALIBRATION - TB-9-5210-201-500003

TB-9-5210-201-50 Gages Spring Tension (5210-356-4645) Manual
Page Navigation
3

TB 9-5210-201-50

c. Removal. Do not remove the unit under test from it; protective case unless

necessitated by equipment connections and/or components to be adjusted which are not

accessible from external ports provided on the unit under test.

4. Difference Among Models. Types D, F, and G are bi-directional, and types H and J

are mono-directional.

SECTION II

CALIBRATION

5. Equipment Required. Equipment required for calibration performance checks and

adjustments is listed in table 1. When any of the equipment listed in table 1 is not

available, equivalent calibrated items m be used.

Table 1. Equipment Required for Calibration Performance Checks and Adjustments

A-AUTHORIZED STANDARD

Nomenclature

Federal Stock No.

Description

WEIGHT SET, GRAM.

4931-787-3635 (7907394)

FIG 2-301-5 (1 to 500 gr).

B-AUTHORIZED ACCESSORY

Nomenclature

Identifying No.

Description

LINE

N/A

1 lb test min

NOTE

Personnel should familiarize themselves with the entire

procedure prior to performing calibration.

6. Preliminary Procedure

a. Fold back handle (fig. 1) of unit under test.

Figure 1. Spring tension gages 5210-366-4645-typical view.