TB 9-5210-207-24
IDENTIFICATION AND DESCRIPTION
1. Test Instrument Identification.
This bulletin provides instructions for the
calibration of Micrometers, Inside (General). See figures 1 through 4. Manufacturers'
manuals were used as the prime data sources in compiling these instructions. The
equipment being calibrated will be referred to as the TI (test instrument) throughout this bulletin.
a. Model Variations. Variations among models are described in text, tables, and figures.
b. Time and Technique. The time required for this calibration is approximately 1
hour, using the physical technique.
Figure 1. Micrometer, caliper, with jaws.
