TB 9-5975-219-24
NOTE
Enter the multimeter displayed values carefully. Enter all
values in base units of volts or ohms. 100 mV would be entered
as .100. Enter AC and DC voltage to a 1 mV resolution, and
resistance to a 1 ohm resolution minimum.
e. Press instrument controller keyboard Enter key and the program will send back an
R for read.
f. When alignment and verification are complete, repeat paragraphs 7 through 11 to
verify proper calibration.
13. Final Procedure
a. Deenergize and disconnect all equipment.
b. Annotate and affix DA label/form in accordance with TB 750-25.
11/(12 blank)