TB 9-6625-096-50
(b) CARRIER SET to redline on meter.
(c) VOR control to 180.
(3) Adjust VOR ZERO adjustment (fig. 3) for 0 (zero) indication on ZIFOR.
NOTE
It may be necessary to further adjust CARRIER frequency and
CARRIER SET to obtain sufficient voltage output for null on
ZIFOR.
(4) Connect equipment as shown in figure 8.
Figure 8. VOR azimuth - equipment setup.
(5) Position frequency counter (A3) controls as indicated in (a) through (f) below:
(a) A and B SLOPE; switches to + (positive).
(b) SEP-COM switch to SEP.
(c) FUNCTION switch to TIME B-A.
16
