CALIBRATION PROCEDURE FOR
DUAL TRACE AMPLIFIERS AM-6880/U
(TEKTRONIX, TYPE 7A18),
TEKTRONIX, TYPES 7A18A,
7A18A W/OPTION 6, AND AM-6785/U
(TEKTRONIX, TYPE 7A26)
Headquarters, Department of the Army, Washington, DC
14 February 2008
Distribution Statement A: Approved for public release; distribution is unlimited
REPORTING OF ERRORS AND RECOMMENDING IMPROVEMENTS
You can improve this manual. If you find any mistakes or if you know of a way to improve these
procedures, please let us know. Mail your letter or DA Form 2028 (Recommended Changes to
Publications and Blank Forms) directly to: Commander, U.S. Army Aviation and Missile Command,
ATTN: AMSAM-MMC-MA-NP, Redstone Arsenal, AL 35898-5000. A reply will be furnished to
you.
You may also send in your comments electronically to our E-mail address:
2028@redstone.army.mil or by fax 256-842-6546/DSN 788-6546. For the World Wide Web use:
https://amcom2028.redstone.army.mil. Instructions for sending an electronic 2028 can be found at
the back of this manual.
Paragraph
Page
IDENTIFICATION AND DESCRIPTION
Test instrument identification .............................
Forms, records, and reports .................................
Calibration description .........................................
EQUIPMENT REQUIREMENTS
Equipment required..............................................
Accessories required .............................................
CALIBRATION PROCESS FOR AM-6880/U
(TEKTRONIX, TYPE 7A18) AND
TEKTRONIX, TYPES 7A18A AND 7A18A
W/OPTION 06
Preliminary instructions ......................................
Equipment setup...................................................
Vertical gain ..........................................................
Risetime .................................................................
Final procedure .....................................................
_________
*This bulletin supersedes TB 9-6625-2099-35, dated 19 July 2002, including all changes.
