TB 9-6625-2124-35
(a) INSTR PRESET key.
(b) CW key, DATA ENTRY 1 GHz.
(c) POWER LEVEL key, DATA ENTRY +13 dBm.
(d)
MOD(ON).
(3) Adjust spectrum analyzer controls as necessary to display the TI output signal.
(4) Measure AM ON/OFF ratio and square wave symmetry. AM ON/OFF ratio
will be greater than 30 dB and square wave symmetry will be 40/60 percent.
(5) Press CW key and enter data 4 GHz on keyboard. Repeat (3) and (4) above.
b. Adjustments. No adjustments can be made.
17. Final Procedure
a. Deenergize and disconnect all equipment.
b. Annotate and affix DA label/form in accordance with TB 750-25.
CALIBRATION PROCESS FOR PLUG-IN, HEWLETT-PACKARD
MODELS 83592A AND 83592A OPT 002
18. Preliminary Instructions
process. Personnel should become familiar with the applicable sections before beginning
the calibration.
