TB 9-6625-2153-35
Table 12. General Resistance, Model RDS-615B - Continued
Performance specifications
Test instrument
Resistance indications
Decade switch
Decade switch
Min
Max
positions
Kilohms - Continued
9
8.9995500
9.0004500
1 kΩ/step (cont)
10
9.9995000
10.000500
1
9.9995000
10.000500
10 kΩ/step
2
19.999000
20.001000
3
29.998500
30.001500
4
39.998000
40.002000
5
49.997500
50.002500
6
59.997000
60.003000
7
69.996500
70.003500
8
79.996000
80.004000
9
89.995500
90.004500
10
99.995000
100.00500
1
99.995000
100.00500
100 kΩ/step
2
199.99000
200.01000
3
299.98500
300.01500
4
399.98000
400.02000
5
499.97500
500.02500
6
599.97000
600.03000
7
699.96500
700.03500
8
799.96000
800.04000
9
899.95500
900.04500
10
999.95000
1000.05000
Test instrument
Performance specifications
Range: 10 MΩ in 1 MΩ steps
CR10M
Accuracy: 0.02%
CR100M
Range: 100 MΩ in 10 MΩ steps
Accuracy: 0.05%
CR1000M
Range: 1000 MΩ in 100 MΩ steps
Accuracy: 0.25%
Resistance indications
Model
Min
Max
CR10M
kΩ
MΩ
999.80000
01.000200
CR100M
09.995000 MΩ
MΩ
010.00500
CR1000M
MΩ
MΩ
099.75000
100.2500
1Repeat measurement for each pair of resistance terminals (2 and 3, 3 and 4, 4 and 5, etc.).
Resistance measuring system
will indicate within limits specified for TI model as listed in table 13. Prepare a calibration test report for all TIs calibrated at
reference level if the TI is not within limits specified in table 13. When calibrating at transfer level, if the TI is not within limits
specified in table 13, the TI will be evacuated to the ACL for calibration support. Once a test report is prepared, all subsequent
support for the TI will be at the ACL. When TI is repaired, and measures within specified limits, a test report is no longer
required and item will revert to original support level (reference or transfer).
24
