TB 9-6625-2176-35
Table 3. Accessories Required
Item
Common name
Description
(part number)
B1
ADAPTER
BNC jack to double banana plug terminations
(7907592)
B2
ADAPTER
GR plug to BNC jack (MS75093)
B3
CABLE
CG-3364/U, GR-874 to GR-874, 50W, 5 ns (p/o TI)
B4
CABLE
36-in., RG-58/U; BNC to double banana
plug terminations (7907471)
LEAD1
B5
32-in., single banana plug to test hook
(black) (7915941-2)
B6
TERMINATION
DA-464/U, GR-874 to BNC plug, 50W (p/o TI)
1
Two required.
SECTION III
CALIBRATION PROCESS
6. Preliminary Instructions
supply check prior to making adjustments.
After
adjustments are made, repeat paragraphs 8 through 10.
Do not perform power supply check if all other
Personnel should become familiar with the entire
parameters are within tolerance.
bulletin before beginning the calibration.
e. Unless otherwise specified, all controls and
b. Items of equipment used in this procedure are
control settings refer to the TI.
referenced within the text by common name and item
identification of equipment referenced by item numbers
WARNING
HIGH VOLTAGE is used or exposed
c. Unless otherwise specified, verify the result of
during the performance of this
each test and, whenever the test requirement is not met,
calibration. DEATH ON CONTACT
take corrective action
before
continuing with the
may result if personnel fail to
calibration. Adjustments required to calibrate the TI
observe safety precautions.
are
included
in this procedure.
Additional
maintenance information is
contained
in
the
a. Connect TI to autotransformer (A1).
manufacturer's manual and TM 11-66252384-15 for this
TI.
4
