*TB 9-6625-2253-35
DEPARTMENT OF THE ARMY TECHNICAL BULLETIN
CALIBRATION PROCEDURE FOR
DIGITAL MULTIMETER
JOHN FLUKE, MODELS 8024A AND 8024B
Headquarters, Department of the Army, Washington, DC
6 November 2003
Distribution Statement A: Approved for public release; distribution is unlimited
REPORTING OF ERRORS AND RECOMMENDING IMPROVEMENTS
You can improve this manual. If you find any mistakes or if you know of a way to
improve these procedures, please let us know. Mail your letter or DA Form 2028
(Recommended Changes to Publications and Blank Forms) directly to: Commander,
U.S. Army Aviation and Missile Command, ATTN: AMSAM-MMC-MA-NP, Redstone
Arsenal, AL 35898-5000. A reply will be furnished to you. You may also provide DA
Form 2028 information to AMCOM via e-mail, fax, or the World Wide Web. Our fax
number is DSN 788-6546 or Commercial 256-842-6546. Our e-mail address is:
2028@redstone.army.mil. Instructions for sending an electronic 2028 may be found
at the back of this manual.
For the World Wide Web, use
https://amcom2028.redstone.army.mil.
Paragraph
Page
IDENTIFICATION AND DESCRIPTION
Test instrument identification..............................
Forms, records, and reports ..................................
Calibration description..........................................
EQUIPMENT REQUIREMENTS
Equipment required ..............................................
Accessories required ..............................................
CALIBRATION PROCESS
Preliminary instructions .......................................
Equipment setup ...................................................
Dc voltage...............................................................
Dc current ..............................................................
Ac voltage ...............................................................
Resistance/conductance.........................................
Final procedure......................................................
_________
*This bulletin supersedes TB 9-6625-2253-35, dated 13 December 1994.
