*TB 9-6625-2263-35
DEPARTMENT OF THE ARMY TECHNICAL BULLETIN
CALIBRATION PROCEDURE FOR
DIGITAL MULTIMETER
JOHN FLUKE, MODEL 8520A
Headquarters, Department of the Army, Washington, DC
13 August 2003
Approved for public release; distribution is unlimited
REPORTING OF ERRORS AND RECOMMENDING IMPROVEMENTS
You can improve this manual. If you find any mistakes or if you know of a way to
improve these procedures, please let us know. Mail your letter or DA Form 2028
(Recommended Changes to Publications and Blank Forms)directly to: Commander,
U.S. Army Aviation and Missile Command, ATTN: AMSAM-MMC-MA-NP, Redstone
Arsenal, AL 35898-5000. A reply will be furnished to you. You may also provide DA
Form 2028 information to AMCOM via e mail, fax, or the World Wide Web. Our fax
-
number is DSN 788-6546 or Commercial 256-842-6546. Our e-mail address is:
2028@redstone.army.mil. Instructions for sending an electronic 2028 may be found at
the
back
of
this
manual.
For
the
World
Wide
Web,
use
https://amcom2028.redstone.army.mil.
Paragraph
Page
IDENTIFICATION AND DESCRIPTION
Test instrument identification .............................
Forms, records, and reports ................................
Calibration description ........................................
EQUIPMENT REQUIREMENTS
Equipment required............................................
Accessories required............................................
CALIBRATION PROCESS
Preliminary instructions.....................................
Equipment Setup................................................
Dc voltage ..........................................................
Resistance..........................................................
Ac voltage...........................................................
Power supply......................................................
Final procedure ..................................................
_________
*This bulletin supersedes TB 9-6625-2263-35 dated 14 January 1992.
