TB 9-6625-2308-40
EQUIPMENT REQUIREMENTS
4. Equipment Required. Table 2 identifies the specific equipment to be used in this
calibration procedure. This equipment is issued with Secondary Reference Calibration
Standards Set, NSN 4931-00-621-7878. Alternate items may be used by the calibrating
activity. The items selected must be verified to perform satisfactorily prior to use and must
bear evidence of current calibration. The equipment must meet or exceed the minimum use
specifications listed in table 2. The accuracies listed in table 2 provide a four-to-one ratio
between the standard and TI. Where the four-to-one ratio cannot be met, the actual
accuracy of the equipment selected is shown in parentheses.
5. Accessories Required. The accessories required for this calibration are common
usage accessories, issued as indicated in paragraph 4 above, and are not listed in this
Table 2. Minimum Specifications of Equipment Required.
Manufacturer and
Common name
Minimum use specifications
model(part number)
BRIDGE TYPE IV
Power range: 0.01 to 30 mW
Tegam, Model 1806
Accuracy: 0.003%
CONTROL UNIT RF
Tegam, Model 1805B
Accuracy: 0.1% +1 mW
FUNCTION
Agilent, Model 33250A
Accuracy: 2 ppm, 18 C to 28 C
(33250A)
MEASURING
Measuring receiver system
RECEIVER
N5531S consisting of:
Power meter, Agilent
Frequency range:100 KHz to 26.5 GHz
Spectrum Analyzer, Agilent
Model E4419B
Power Range: -70 dBm to +44 dBm
Model E4448A (E4448A),
Power meter, Agilent Model
Power meter, Agilent
Frequency range:50 MHz to 26.5 GHz
E4419B (E4419B), or Power
Model N1911A
35 dBm to +20 dBm (> 500 MHz)
meter, Agilent Model
30 dBm to +20 dBm (50 MHz to 500 MHz)
N1911A (N1911A) and
Sensor modules, Agilent
Sensor modules
Frequency range:10MHz to 18 GHz
Model N5532A opt. 504
Power Range: +30 dBm (1 watt)
(504), 518 (518), 526 (526),
to -20 dBm (10 W)
550 (550)
Range: 0.1 V dc
Hewlett Packard, Model
Accuracy:
0.013% of indication +0.005% of FS
3458A (3458A)
Range: 1 to 15 V dc
Accuracy:
0.013% of indication +0.002% of FS
Accuracy:
1%
POWER METER
Tegam, Model 1830A
dependent)
(1830A) w/thermistor
Power range:
mount, Hewlett Packard,
-30 to +14 dBm (0.001 mW to 30 mW)
Model 478A-H75 (7915907)
0.3% at 1 mW
See footnote at end of table.