DEPARTMENT OF THE ARMY TECHNICAL BULLETIN
CALIBRATION PROCEDURE FOR
PRECISION COMPONENT ANALYZER
WAYNE KERR, MODEL 6425B
Headquarters, Department of the Army, Washington, DC
22 February 2006
Distribution Statement A: Approved for public release; distribution is unlimited.
REPORTING OF ERRORS AND RECOMMENDING IMPROVEMENTS
You can improve this manual. If you find any mistakes or if you know of a way to improve these
procedures, please let us know. Mail your letter or DA Form 2028 (Recommended Changes to
Publications and Blank Forms) directly to Commander, U.S. Army Aviation and Missile Command,
ATTN: AMSAM-MMC-MA-NP, Redstone Arsenal, AL 35898-5000. A reply will be furnished to you.
You may also provide DA Form 2028 information to AMCOM via e-mail, fax, or the World Wide
Web. Our fax number is DSN 788-6546 or Commercial 256-842-6546. Our e-mail address is:
2028@redstone.army.mil. Instructions for sending an electronic 2028 may be found at the back of
this manual. For the World Wide Web, use https://amcom2028.redstone.army.mil/.
Paragraph
Page
IDENTIFICATION AND DESCRIPTION
Test instrument identification .............................
Forms, records, and reports..................................
Calibration description .........................................
EQUIPMENT REQUIREMENTS
Equipment required..............................................
Accessories required .............................................
CALIBRATION PROCESS
Preliminary instructions ......................................
Equipment setup...................................................
Output frequency .................................................
Trimming O/C and S/C .........................................
Capacitance ...........................................................
Inductance .............................................................
Final procedure .....................................................
_________
*This bulletin supersedes TB 9-6625-2313-50, dated 21 March 1997, including all changes.
