TB 9-6625-2358-50
Table 2. Minimum Specifications of
Equipment Required
Manufacturer and model
Common name
Minimum use specifications
(part number)
Rodale Electronics, Model
BAND PASS FILTER
Cutoff frequency: 0.1 1000 MHz
13589299 (13589299)
Insertion loss: ≤ 2 dB
Bird Electronics, Model 6091
(6091)
Power range: 10 to 200 Watts
Accuracy: (10-25 Watts: 3%)
(25-200 Watts: 1.25%)
RF POWER METER
Bird, Model 4421 (4421)
Power range: 7.5 to 85 W
Accuracy: 1%
(SG-1207/U)
Accuracy: +10 ppm
Power output range: 100 mW
Common name
Description (part number)
INSTRUMENT CONTROLLER
Polywell (MIS-45854) or comparable
Bird Electronic Corporation, Model 4421A500
RF POWER AMPLIFIER
Antenna Research Associates Inc., Model ARA757LC-
CE (757LC)
5. Accessories Required. The
accessories listed in table 3
are issued as
indicated in
paragraph 4 above, and
are used in this
calibration procedure. When necessary, these
items may be substituted by equivalent items, unless specifically prohibited.
6. Preliminary
Instructions
a. The
instructions outlined in
paragraphs 6 and
7 are preparatory to the
calibration
process. Personnel should become familiar with the entire bulletin before beginning the
calibration.
b. Items of equipment used in this procedure are referenced within the text by common
c. Unless otherwise specified, verify the results of each test and, whenever the test
requirement is not met, take corrective action before continuing with the calibration.
Adjustments required to calibrate the TI are included in this procedure. Additional
maintenance information is contained in the manufacturer's manual for this TI.
d. Unless otherwise specified, all controls and control settings refer to the TI.