DEPARTMENT OF THE ARMY TECHNICAL BULLETIN
CALIBRATION PROCEDURE FOR
FAULT LOCATION ANALYZER, ECLYPSE
INTERNATIONAL, MODEL ESP+
(PART NUMBER 980-ESP-00256)
Headquarters, Department of the Army, Washington, DC
13 June 2006
Distribution Statement A: Approved for public release; distribution is unlimited.
REPORTING OF ERRORS AND RECOMMENDING IMPROVEMENTS
You can improve this manual. If you find any mistakes or if you know of a way to
improve these procedures, please let us know. Mail your letter or DA Form 2028
(Recommended Changes to Publications and Blank Forms) directly to: Commander,
US Army Aviation and Missile Command, AMSAM-MMC-MA-NP, Redstone Arsenal,
AL 35898-5000. A reply will be furnished to you. You may also provide DA Form
2028 information to AMCOM via e-mail, fax, or the World Wide Web. Our fax
number is DSN 788-6546 or Commercial 256-842-6546. Our e-mail address is
2028@redstone.army.mil. Instructions for sending an electronic 2028 may be found
at the back of this manual.
For the World Wide Web, use
https://amcom2028.redstone.army.mil.
Paragraph
Page
IDENTIFICATION AND DESCRIPTION
Test instrument identification.........................................
Forms, records, and reports .............................................
Calibration description.....................................................
EQUIPMENT REQUIREMENTS
Equipment required .........................................................
Accessories required .........................................................
CALIBRATION PROCESS
Preliminary instructions ..................................................
Equipment setup ..............................................................
Frequency accuracy ..........................................................
Amplitude accuracy ..........................................................
A and B measurement accuracy ......................................
Relative A and B measurement accuracy .......................
Final procedure.................................................................
