TB 9-6635-203-35
Table 2. Minimum Specifications of Equipment Required
Minimum use
Manufacturer and model
Item
Common name
specifications
(part number)
A1
BALANCE WEIGHT SET
Range: 1 to 12.8 oz
(7910419)
Accuracy:
Class C
A2
BALANCE WEIGHT SET
Range: 5 to 150 lbs
(7910346)
Accuracy:
Class T
A3
HANGER ASSEMBLY
Range: 5 lbs
(7916702) (p/o 7916705)
0.02 lbs
Accuracy:
A4
STANDARD WEIGHT SET
Range: 1 to 40 lbs
(7909056)
Accuracy:
Class T
Table 3. Accessories Required
Common name
Description
Item
(official nomenclature)
(part number)
B1
CABLE
(7916704) (p/o 7916705)
B2
CABLE HOLDER
(7916703) (p/o 7916705)
B3
MECHANICAL LOADER
Loader with extended leg (7916274)
B4
Capable of supporting mechanical loader (7915876)
SECTION III
6. Preliminary Instructions
process. Personnel should become familiar with the entire bulletin before beginning the
calibration.
b. Items of equipment used in this procedure are referenced within the text by common
name and item identification number as listed in tables 2 and 3. For the identification of
equipment referenced by item numbers prefixed with A, see table 2, and for prefix B, see
NOTE
Unless otherwise specified, verify the result of each test and,
whenever the test requirement is not met, take corrective
action before continuing with the calibration. Adjustments
required to calibrate the TI are included in this procedure.
Additional maintenance information is contained in the
manufacturer's manual for this TI.
NOTE
Unless otherwise specified, all controls and control settings
refer to the TI.
3
