TB 9-6670-251-35
SECTION I
IDENTIFICATION AND DESCRIPTION
This bulletin provides instructions for the
1. Test Instrument Identification.
calibration of Resiliency Testers (General) (figure 1). The manufacturer's manual was used
as the prime data source in compiling these instructions. The equipment being calibrated
will be referred to as the TI (test instrument) throughout this bulletin.
a. Model Variations. None.
b. Time and Technique. The time required for this calibration is approximately 1
hour, using the physical technique.
2. DA Form 2416 (Calibration Data Card)
prescribed by TB 750-25-1. DA Form 2416 must be annotated in accordance with TB 750-
25-1 for each calibration performed.
b. Adjustments to be reported on DA Form 2416 are designated (R) at the end of the
sentence in which they appear. When adjustments are in tables, the (R) follows the
designated adjustment. Report only those adjustments made and designated with (R).
pertain to this calibration are listed in table 1.
Table 1. Calibration Description
Test instrument
parameters
Performance specifications
Weight
Range: 0 to 300 lbs,
0 to 1000
grams
Accuracy: 1 graduation
2
