TB 9-6695-261-35
(3) Repeat (2) above for -22 V test point (fig. 1). If multimeter does not indicate
between -21 and -23 V dc, perform b (2) below.
b. Adjustments
(1) Adjust R114B (fig. 1) to obtain +22 V indication on multimeter (R).
(2) Adjust R127B (fig. 1) to obtain 22 V indication on multimeter (R).
14. Final Procedure
a. Deenergize and disconnect all equipment and reinstall protective cover on TI.
b. Annotate and affix DA label/form in accordance with TB 750-25.
10
