DEPARTMENT OF THE ARMY TECHNICAL BULLETIN
CALIBRATION PROCEDURE FOR
REMOTE PRESSURE MEASURING
SYSTEM 11567561
(VALIDYNE MODEL PS201)
Headquarters, Department of the Army, Washington, DC
22 March 1985
REPORTING OF ERRORS
You can help improve this publication by calling attention to errors and by
recommending improvements and stating your reasons for the recommendations.
Your letter or DA Form 2028, Recommended Changes to Publications, should be
mailed directly to Commander, U. S. Army Aviation and Missile Command, ATTN:
AMSAM-TMD-EP, Redstone Arsenal, AL 35898-5000. FAX to DSN 788-2313
(commercial 256-842-2313). A reply will be furnished directly to you.
Paragraph
Page
IDENTIFICATION AND DESCRIPTION
Test instrument identification............................
Calibration description .......................................
EQUIPMENT REQUIREMENTS
Equipment required ...........................................
Accessories required ...........................................
PRELIMINARY OPERATIONS
Preliminary instructions ....................................
Equipment setup ................................................
IV.
CALIBRATION PROCESS
TI zero control calibration ..................................
TI span control calibration .................................
Final procedure...................................................
__________
*This technical bulletin supersedes TB 9-6920-430-50, dated 6 May 1981.