TM 9-4935-294-15/2
1-Frame assembly-7921084
25-Screw, machine, pan hd, no. 6-32, 3/4 in. Ig,
2-Cable, ground-7911280-2
UNC-2A- --MS51957-32
3-Nut, self-locking, thin, 1/4-28, UNF-3B-MS20364-428
26-Washer, flat--7923098-1
4-Washer, fiat-MS27183-12
27-Manual box assembly--7921136
5-Screw, cap, hex hd, 1/4-28, in. Ig, UNF-2A--
28-Nut, self-locking, thin, no. 8-.42, NC-2B-MS20364-
MS90726-6
832
6-Screw, cap, hex hd, 1/4-28, in. Ig, UNF-2A-
29-Washer, flat-MS27183-7
MS90726-3
0--Screw, machine, pan hd, no. 8-32, 1/2 in. Ig, UNC-
7-Washer, lock, split, helical, no. 10-MS35337-25
2A-MS35206-245
8-Nut, hex, light, 1/4-20, UNC-2B-7919818
31-Nut, self-locking, thin, no. 10-
9-Screw, machine, hex hd, -20, 7/8 in. Ig, UNC-
32, NF-3B---MS20364-1032
2A-MS35297-7
32-Screw,machine,flat-counter-sunk hd, no. 10-32, 5/8
10-Washer, fiat-MS271813-2
in. Ig, NF-2A- MS35240-73
11-Plate, isolator, mounting--7923-339
33-Receptacle, female--10528291
12-Screw, cap, hex hd, 1/4-28, 5/8 in. Ig, UNF-2A--
34-Screw, pan hd, no. 6-32, 3/8 in. Ig, NC-2A-
MS35298-6
MS35223-43
13--Washer, lock, split, helical, no. 10-MS35338-82
36-Receptacle, male--7920422
14-Isolator, helical, assembly--791-9817
36-Nut, plain, hex hd, machine screw, no. 8-32,
15-Screw, machine, flat counter-sunk hd, 1/4-28, 5/8
UNC-2B-MS35649-82
in. Ig, UNF-2A-MS35240-90
37-Door assembly-7921133
16-Bracket,isolator,mounting-7923340
3S--Pin, hinge-7920432
17-Screw, cap, hex hd, 1/4-28, in. Ig, UNF-2A-
39-Catch, door-7921140
MS35298-6
40-Indicator, humidity, plug, color change-7920789
18-Strip-7923210
41-Relief valve assembly--8625707
19-Screw, machine, pan hd, no. 10-32, 1/2 in. Ig,
42-Nut, plain, hex, conduit coupling, 7/8-20, UNEF-
UNF-2A--MS51958-63
2B-862-5746
20-Washer, nylon-7923098--2
43-Washer, lock, internal tooth-8625745
21-Strip--7923208
44-Packing, preformed, "0" ring-MS29513-21
22-Nut, plain, hex, machine screw, no. 6-32, UNC--
45-Insert-7921096
2B-MS35649-64
46-Screw, machine, flat-counter-sunk hd, 5/16-18,
23-Washer, lock, split, helical no. 6-MS35338-79
7/16 in. lg, UNC-2A-MS35243-100
24-Washer,
flat-MS27183-6
47-Cover assembly-7921090
48-Gasket-7921097
49-Caster-7921191
50--Cable, extension-10519583
Figure 4-35.--Continued
b. Disassembly of lsolator Shock Mounts. To
Caution. Ground cable (2) provides a positive ground
disassemble the isolator shock mounts, refer to figure 4-
connection when installed.
d. reinstallation. To reinstall the inner frame and
35 and remove items (11) through (17).
c. Assembly of Isolator Shock Mounts. To as-
isolator shock mounts, refer to figure 4-35 and reverse
semble the isolator shock mounts, refer to figure 4-85
the order of removal.
Note. Check the condition of relief valve assembly
and reverse the order of disassembly. Use loctite (grade
B)
on
the
screw
threads.
(41) and humidity indicator (40) and replace, if required,
prior to reinstallation.
Section VI. ALIGNMENT PROCEDURES FOR RF PLUG-IN SIGNAL SOURCES
b. Follow instructions in the Technical Bulletins listed
4-27. Alinement Procedure
below for alinement procedures for the respective rf
To aline any of the seven rf heads (eight frequency
bands) after reassembly, proceed as follows:
head.
a. Set all adjustable potentiometers to mid-
P-band (0.5-1 GHz)--TB 9-4931-296-59
position.
L-band (1-2 GHz)---TB 9-4931-297-50
S-band (2- 4 GHz)--TB 9--4931-298-50
4-57
