(b) START/CW control to 100.
(b) START/CW control to 50.
(c) STOP/ F control to 10 (1 on F scale),
(c) INT SQ WAVE pushbutton pressed.
(d) FUNCTION
F pushbutton pressed.
(3) Set UUT SCALE switch to X1.
(e) All AMPLITUDE MOD pushbut-
tons released.
b. Adjustments. No adjustments can be made.
(3) Position UUT controls as follows:
(a) SCALE switch to X.1.
(b) 5-MHz CRYSTAL switch to ON.
a. Performance Check.
(1) Connect equipment as shown in figure
beat.
(5) Electronic counter indicates between
9.999 and 10.001 MHz.
lows:
(a) SWEEP SELECTOR to MANUAL.
b. Adjustments. No adjustments can be made.
39