TB 9-6625-1314-35
Adjust rear panel ZERO adjustment to obtain an indication of 0.000 with + (plus) and -
(4) Remove short from INPUT terminals.
Adjust A2R40 CHARGE RESTORER ADJ (fig. 1) to obtain an indication of
0.000 with + (plus) and - (minus) indicator lights flashing alternately (R).
Repeat a(2) and (3) above.
Set RANGE switch to 10 V
(8)
(9) Position INT CHECK 8000 adjustment to
its
(approximately five turns from fully cw (clockwise) position).
(10)
) to obtain an indication of +8.000 on TI
(R). If required, fine adjust, using INT CHECK 8000 adjustment (R).
11