DEPARTMENT
OF
THE
ARMY
TECHNICAL
BULLETIN
CALIBRATION PROCEDURE FOR SIMULATIOR-MONITOR SM-567/APS-94D
Headquarters, Department of the Army, Washington, D. C.
12 March 1971
Paragraph
Page
I. GENERAL
Purpose and scope ..................................................................................................................... 1
Reporting of technical bulletin improvements ............................................................................. 2
Description .................................................................................................................................. 3
General instructions .................................................................................................................... 4
Difference among models ........................................................................................................... 5
II.CALIBRATION
Equipment required..................................................................................................................... 6
Preliminary procedures ............................................................................................................... 7
Navigation ground speed transformer B1 coarse position .......................................................... 8
Navigation ground speed transformer B1 fine position ............................................................... 9
Navigation drift transformer B2 coarse position ......................................................................... 10
Navigation drift transformer B2 fine position .............................................................................. 11
Final procedure .......................................................................................................................... 12
SECTION I
GENERAL
use of the standards are not contained in this bulletin.
1. Purpose and Scope. a. This bulletin which is used
b. This bulletin also contains illustrations that show the
by maintenance calibration personnel, provides
location of all controls and components utilized in this
information for the periodic calibration of Simulator-
calibration procedure as well as diagrams showing
Monitor SM-567,, APS-94D (fig. 1). Since calibration
equipment setups. Equipment ground connections are
personnel are trained and qualified in the use of
not necessarily shown in the diagrams.
calibration test and measuring equipment detailed
instructions concerning the operation and detailed
instructions
concerning
the
operation
and
1
