TB 9-4920-466-24
(8) Apply the indicated pressure to the TI. Press CLEAR until "-P-"is displayed,
indicating that the reading is being stored.
(9) When the last pressure point has been entered, the instrument will turn itself off.
At this time, the mode jumper must be moved from its "CALIBRATION" position to its
PARK" position as indicated in figure 2.
(10) Repeat steps 8 a (1) thru (5) above.
Final Procedure
a. Deenergize and disconnect all equipment.
b. Annotate and affix DA label/form in accordance with TB 750-25.