TB 9-4931-393-35
SECTION II
EQUIPMENT REQUIREMENTS
4. Equipment
Required. Table 2 identifies the
specific equipment used in this
calibration procedure. This equipment is issued with Secondary Transfer Standards
493101-019-1829 (AN/GSM-259), and Transportable Maintenance Calibration Facility
AN/TSM-55( ), and is to be used in performing this procedure. Alternate items may be
used by the calibrating activity when the equipment listed in table 2 is not available.
The items selected must be verified to perform satisfactorily prior to use and must bear
evidence of current calibration. The equipment must meet or exceed the minimum use
specifications listed in table 2. The accuracies listed in table 2 provide a four-to-one ratio
between the standard and TI.
5. Accessories Required. The
accessories listed in
table 3 are
issued as
indicated in
paragraph 4 above and are to be
used in this
calibration procedure. When
necessary,
these items may be substituted by equivalent items unless specifically prohibited.
Table 2. Minimum Specifications of
Equipment Required
Common name
and/or
Minimum use
AN/GSM
AN/GSM-
Item
official nomenclature
specifications
Level A
-256
259
AN/TSM-55
A1
Range: 105 to
General Radio,
Same as
Same as
TF-510/U General
(VARIABLE
125 V ac
Model
Level A
Level A
Radio, Model
POWER
Accuracy: 1%
W10MT3AS3
W10MT3A (6120-
(7910809)
054-7794)
A2
Range: 0.44699 to
John Fluke,
Same as
Same as
TS-2843 /U
(DIFFERENTIAL
30.05 V dc
Model
Level A
Level A
John Fluke,
Accuracy:
887ABAN
Model 883AB
0.0125%
(887ABAN)
(6625-054-
6496)
A3
Range: 99.44 to
ESI, Model
ESI,
Same as
AN/USM-263
200.12 Ω
230B
Model
AN/GSM-
(6625-927-
Accuracy: 0.015%
(7912150-2)
250DER
256
4451)
ESI, Model
(250DER)
801 MOD
(7912151-2)
Common name
and/or
Item
(official nomenclature)
Description and part number
B1
CABLE ASSEMBLY
30-in., RF with double banana plug terminations
(Red) (7907470)
B2
LEAD
4-in., No. 18 AWG banana plug terminations (Black)
(7907492)
B3
TEST HOOK PROBE 1
Banana plug to mini-hook (SKC4850-14)
1Two
required.