• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
SECTION I. IDENTIFICATION AND DESCRIPTION

Calibration Procedure For Signal Generator, Sg1112Viu, Sg1112V2U, And Mis-28707Ty2 Page Navigation
1  2    3    4    5    6  
img
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
*TB 9-4931-488-24
DEPARTMENT OF THE ARMY TECHNICAL BULLETIN
CALIBRATION PROCEDURE FOR
SIGNAL GENERATOR, SG1112VlU,
SG1112V2U AND MIS-28707TY2
(HEWLETT-PACKARD, MODEL 8640B,
OPTIONS 001, 002, 003, 004 AND H66)
Headquarters, Department of the Army, Washington, DC
6 January 2013
Distribution Statement A: Approved for public release; distribution is unlimited.
REPORTING OF ERRORS AND RECOMMENDING IMPROVEMENTS
You can improve this manual. If you find any mistakes or if you know of a way to improve
these procedures, please let us know.  Mail your letter or DA Form 2028 (Recommended
Changes to Publications and Blank Forms) directly to: Commander, U.S. Army Aviation and
Missile Command, ATTN: AMSAM-MSS-LP, Redstone Arsenal, AL 35898-5000. A reply will be
furnished to you. You may also send in your comments electronically to our E-mail address:
2028@redstone.army.mil or by fax 256-842-6546/DSN 788-6546. For the World Wide Web use:
https://amcom2028.redstone.army.mil. Instructions for sending an electronic 2028 can be found
at the back of this manual.
Paragraph
Page
SECTION
I.
IDENTIFICATION AND DESCRIPTION
Test instrument identification ............................
1
2
Forms, records, and reports .................................
2
2
Calibration description ........................................
3
3
II.
EQUIPMENT REQUIREMENTS
Equipment required .............................................
4
5
Accessories required.............................................
5
5
III.
CALIBRATION PROCESS
Preliminary instructions......................................
6
6
Equipment setup ..................................................
7
6
Internal reference accuracy .................................
8
8
Frequency range, accuracy, and stability ...........
9
8
Harmonic distortion .............................................
10
8
Output level and meter accuracy (all models
11
11
except those containing option 004) .................
Output level and meter accuracy (models
12
18
containing option 004)........................................
__________
*This bulletin supersedes TB 9-4931-488-24, dated 20 September 2007, including all changes.


Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved.