• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
SECTION I. IDENTIFICATION AND DESCRIPTION

Calibration Procedure For Oscilloscope Os-245(P)/U, And Types 7603 And 7603N Opt 11S, Vertical Amplifier Am-6565/U, And Types 7A15A And 7A15An Opt 11, And Dual Time Base Td-1085/U And Td-1159/U And Types 7B53A, 7B53An Opt 5 And Opt 11S Page Navigation
1  2    3    4    5    6  
img
. . . . . . . . . . . . . . . . . . . . . . . .
*TB 9-6625-2024-24
DEPARTMENT OF THE ARMY TECHNICAL BULLETIN
CALIBRATION PROCEDURE FOR
OSCILLOSCOPE OS-245(P)/U, AND
TEKTRONIX TYPES 7603 AND 7603N OPT 11S,
VERTICAL AMPLIFIER AM-6565/U, AND
TEKTRONIX TYPES 7A15A AND 7A15AN OPT 11, AND
DUAL TIME BASE TD-1085/U AND TD-1159/U AND
TEKTRONIX TYPES 7B53A, 7B53AN OPT 5 AND OPT 11S
Headquarters, Department of the Army, Washington, DC
29 February 2008
Distribution Statement A: Approved for public release; distribution is unlimited.
REPORTING OF ERRORS AND RECOMMENDING IMPROVEMENTS
You can improve this manual. If you find any mistakes or if you know of a way to improve these
procedures, please let us know.  Mail your letter or DA Form 2028 (Recommended Changes to
Publications and Blank Forms) directly to: Commander, U.S. Army Aviation and Missile Command,
ATTN: AMSAM-MMC-MA-NP, Redstone Arsenal, AL 35898-5000. A reply will be furnished to
you.
You may  also  send  in your comments electronically to our E-mail address:
2028@redstone.army.mil or by fax 256-842-6546/DSN 788-6546.  For the World Wide Web use:
https://amcom2028.redstone.army.mil. Instructions for sending an electronic 2028 can be found at
the back of this manual.
Paragraph
Page
SECTION
I.
IDENTIFICATION AND DESCRIPTION
Test instrument identification ............................
1
2
Forms, records, and reports ...............................
2
2
Calibration description .......................................
3
3
II.
EQUIPMENT REQUIREMENTS
Equipment required ............................................
4
4
Accessories required ............................................
5
4
III.
CALIBRATION PROCESS FOR
OSCILLOSCOPE OS-245 (P)/U AND
TEKTRONIX TYPES 7603 AND
7603N OPT 11S
Preliminary instructions ......................................
6
5
Equipment setup ..................................................
7
6
Calibrator ..............................................................
8
7
Vertical amplifier centering and gain .................
9
8
Vertical high frequency compensation
and risetime .....................................................
10
10
_________
*This bulletin supersedes TB 9-6625-2024-35, dated 12 December 2002.


Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved.