TB 9-6625-2059-35
(8) Adjust MIN DISP A4A1R34 (fig. 1) until signal strength peak is aligned with
first vertical graticule line (R).
(9) Adjust MIN DISP A4A1R34 (fig. 1) until signal strength peak is aligned with
11th vertical graticule line (R).
(10) Repeat a (6) and (7) above and if required, adjust MIN DISP A4A1R34 (fig. 1) for
best in-tolerance compromise.
19. Power Meter
a. Performance Check
(1) Set DEV/PWR switch to WATTS X1 and GEN-RCVR switch to RCVR. If
indication on DEVIATION (kHz) WATTS meter.
(2) Connect equipment as shown in figure 7.
SIGNAL GENERATOR
AMPLIFIER-POWER SUPPLY
TI
LOAD
SOURCE
