*TB 9-6625-2142-40
DEPARTMENT OF THE ARMY TECHNICAL BULLETIN
CALIBRATION PROCEDURE FOR
SAMPLING UNIT AM-6787/U
(TEKTRONIX, TYPE 7S11) AND
SAMPLING SWEEP UNIT TD-1161/U
(TEKTRONIX, TYPES 7T11 AND 7T11A)
Headquarters, Department of the Army, Washington, DC
28 August 2007
Distribution Statement A: Approved for public release; distribution is unlimited.
REPORTING OF ERRORS AND RECOMMENDING IMPROVEMENTS
You can improve this manual. If you find any mistakes or if you know of a way to
improve these procedures, please let us know. Mail your letter or DA Form 2028
(Recommended Changes to Publications and Blank Forms) directly to: Commander,
U.S. Army Aviation and Missile Command, ATTN:
AMSAM-MMC-MA-NP,
Redstone Arsenal, AL 35898-5000. A reply will be furnished to you. You may also
send
in
your
comments
electronically
to
our
E-mail
address:
2028@redstone.army.mil or by fax 256-842-6546/DSN 788-6546. For the World Wide
Web use:
https://amcom2028.redstone.army.mil.
Instructions for sending an
electronic 2028 can be found at the back of this manual.
Paragraph
Page
IDENTIFICATION AND DESCRIPTION
Test instrument identification ...........................
Forms, records, and reports ................................
Calibration description .......................................
EQUIPMENT REQUIREMENTS
Equipment required ............................................
Accessories required ............................................
CALIBRATION PROCESS FOR SAMPLING
UNIT AM-6787/U (TEKTRONIX, TYPE
7S11)
Preliminary instructions .....................................
Equipment setup .................................................
Vertical deflection ...............................................
Delay range ..........................................................
Final procedure ...................................................
_________
*This bulletin supersedes TB 9-6625-2142-50, dated 16 July 1990.