TB 9-6625-2237-24
Table 3. Accessories Required
Common name
Description (part number)
ANTENNA PLATE ASSEMBLY1
ACR Electronic, A3-06-0109, 6625-01-151-7662
CALIBRATION ANTENNA NO.11
ACR Electronic, A3-01-0299, 243.0 MHz, 6625-01-152-9382
CALIBRATION ANTENNA NO. 21
ACR Electronic, A3-01-0300, 282.8 MHz, 6625-01-152-9381
CALIBRATION PLUG1
ACR Electronic, A3-06-0991, 6625-01-151-9595
DC POWER SUPPLY
Kepco, Model HB525 (7915935)
7510-00-128-0064
FLEXIBLE NYLON LEDGER
POST2
1Supplied
with TI.
2Locally provided.
CALIBRATION PROCESS
6. Preliminary Instructions
a. The instructions outlined in paragraphs 6 and 7 are preparatory to the calibration
process. Personnel should become familiar with the entire bulletin before beginning the
calibration.
b. Items of equipment used in this procedure are referenced within the text by common
name as listed in tables 2 and 3.
c. Unless otherwise specified, verify the result of each test and, whenever the test
requirement is not met, take corrective action before continuing with the calibration.
Adjustments required to calibrate the TI are included in this procedure. Additional
maintenance information is contained in TM 11-6625-3203-23P.
d. Unless otherwise specified, all controls and control settings refer to the TI.
7. Equipment Setup
HIGH VOLTAGE is used or exposed during the performance of
this calibration.
DEATH ON CONTACT may result if
personnel fail to observe safety precautions.
REDUCE
OUTPUT(S) to minimum after each step within the
performance check where applicable.
4 CHANGE 1