TB 9-6625-2274-50
(3) Acquire signal using digitizing oscilloscope and set sweep speed to 100 s /D.
Digitizing oscilloscope will display a waveform cycle.
(4) Press AMPLITUDE MODE FREQ
pushbutton to highlight 100 Hz and set
digitizing oscilloscope timebase to 1 ms/D.
(5) Acquire signal using digitizing oscilloscope and set sweep speed to 1 ms/D.
Digitizing oscilloscope will display a waveform cycle.
(6) Press OUTPUT ON pushbutton off.
b. Adjustments. No adjustments can be made.
29. Final Procedure
a. Deenergize and disconnect all equipment.
b. Annotate and affix DA label/form in accordance with TB 750-25.
