DEPARTMENT OF THE ARMY TECHNICAL BULLETIN
CALIBRATION PROCEDURE
FOR
PEAK POWER METER
WAVETEK, MODEL 8502A
Headquarters, Department of the Army, Washington, DC
1 March 2005
Distribution Statement A: Approved for public release; distribution is unlimited.
REPORTING OF ERRORS
You can improve this manual. If you find any mistakes or if you know of a way
to improve these procedures, please let us know. Mail your letter or DA Form
2028 (Recommended Changes to Publications and Blank Forms) directly to:
Commander, US Army Aviation and Missile Command, AMSAM-MMC-MA-NP,
Redstone Arsenal, AL 35898-5000. A reply will be furnished to you. You may
also provide DA Form 2028 information to AMCOM via e-mail, fax, or the World
Wide Web. Our fax number is DSN 788-6546 or Commercial 256-842-6546. Our
e-mail address is 2028@redstone.army.mil. Instructions for sending an
electronic 2028 may be found at the back of this manual. For the World Wide
Web, use https://amcom2028.redstone.army.mil.
Paragraph
Page
SECTION
IDENTIFICATION AND DESCRIPTION
Test instrument identification ..........................
Forms, records, and reports...............................
Calibration description ......................................
EQUIPMENT REQUIREMENTS
Equipment required ...........................................
Accessories required...........................................
CALIBRATION PROCESS
Preliminary instructions....................................
Equipment setup ................................................
Calibrator frequency accuracy test ...................
Calibrator output level test ...............................
Power linearity test............................................
Analog output accuracy test ..............................
Voltage proportional to frequency test .............
Power supply ......................................................
Final procedure ..................................................
__________
*This bulletin supersedes TB 9-6625-2280-35, dated 5 October 1992.
