TB 9-6625-2320-35
NOTE
In the TRIG_POS_CAL adjustment, the 22 MHz, 7 division
amplitude check, if the signal is not triggered, the TRIGGER
MAIN LEVEL key may need to be adjusted to trigger signal.
(1)
Follow instructions to complete the adjustment process.
NOTE
If the 700A Field Adjustment Software produces a failing
error, it is recommended that the adjustment process
continue until the failing section can be re-run. If software is
interrupted or stopped, the adjustment process will have to
be initiated again from the beginning.
j.
Repeat/perform paragraphs 8 through 19 above.
40
