TB 9-6625-2331-35
(3) Connect signal generator RF OUT to TI A input.
(4) Set the signal generator RF OUT to on.
as listed in table 3.
(6) Repeat technique of (1), (4) and (5) above for remaining settings listed in table
Table 3. Sensitivity.
Test instrument
Signal generator
input
Amplitude
Frequency
(dBm)
(MHz)
Input A
-21
1
Input A
-21
50
Input A
-21
100
Input A
-17
200
Input A
-15
250
Input A
-11
300
Input B1
-21
1
Input B
-21
50
Input B
-21
100
the signal generator connection from TI input A to input B, and press SWAP A↔B key.
1Move
(7) Move connection from TI input B to input C.
(8) Connect the signal generator 10 MHz Ref Out to TI REFERENCE IN (rear
panel).
(9) Press TI keys as listed in (a) through (c) below:
(a) LOCAL/PRESET.
(b) FUNCTION ? ? to select FREQ C.
(c) EXT REF.
(10) Set signal generator for a 150 MHz -21 dBm output.
as listed in table 4.
(12) Repeat technique of (10) and (11) above for remaining settings listed in table
4.
Test
Signal generator
instrument
Amplitude
Frequency
input
(dBm)
(MHz)
Input C
-21
150
Input C
-21
200
Input C
-27
500
Input C
-27
1000
Input C
-27
2000
6
