TB 9-6625-2340-35
(3) Remove cables attached to the A3 digital storage cage.
(4) Remove digital storage cage cover.
(5) Reconnect cables to digital storage cage removed in (3) above.
(6) Connect TI RF INPUT to TI CAL OUTPUT through attenuator No. 2.
(7) Set TI LINE switch to ON.
(8) Press TI 2-22 GHz key.
(9) Connect multimeter HI to A4A1TP1 (fig. 21) and multimeter LO to A3A9TP1
Figure 21. A4A1 board.
Figure 22. A3A9 board.
(10) Press TI keys as listed in (a) through (c) below:
(a) CENTER FREQUENCY, 100, MHz.
(b) FREQUENCY SPAN, 0, Hz.
(c) SCALE LIN.
