TB 9-6695-273-35
IDENTIFICATION AND DESCRIPTION
This bulletin provides instructions for the
calibration of Microwave Comb Generator, Tektronix, Type 067-0885-00.
The
manufacturer's manual was used as the prime data source in compiling these instructions.
The equipment being calibrated will be referred to as the TI (test instrument) throughout
this bulletin.
a. Model Variations. None.
b. Time and Technique. The time required for this calibration is approximately 2
hours, using the microwave technique.
prescribed by TB 750-25.
b. Adjustments to be reported are designated (R) at the end of the sentence in which
they appear. When adjustments are in tables the (R) follows the designated adjustment.
Report only those adjustments made and designated with (R).
pertain to this calibration are listed in table 1.
Test instrument parameters
Performance specifications
Frequency (signal source)
Range: 500 Mhz
Accuracy: 0.01%
Output power (signal source)
Range: +30 dBm
Accuracy: 2 dB
Frequency (GHz)
Power (dBm)
Output power (comb generator module)
0.5
5
1
3
2
1
4
-4
6
-9
8
-13
10
-17
12
-20
14
-23
16
-26
18
-28
Accuracy: 10 dB
EQUIPMENT REQUIREMENTS
calibration procedure. This equipment is issued with Secondary Transfer Calibration
Standards Set AN/GSM-287 or AN/GSM-705. Alternate items may be used by the
