*TB 9-6695-294-35
DEPARTMENT OF THE ARMY TECHNICAL BULLETIN
CALIBRATION PROCEDURE FOR
DIGITAL MULTIMETER,
JOHN FLUKE, MODEL 8506A/CT
Headquarters, Department of the Army, Washington, DC
6 July 2001
Approved for public release, distribution is unlimited.
REPORTING OF ERRORS AND RECOMMENDING IMPROVEMENTS
You can help improve this publication. If you find any mistakes or if you know of a
way to improve the procedure, please let us know. Mail your letter or DA Form 2028
to: Commander, U. S. Army Aviation and Missile Command, ATTN: AMSAM-MMC-
MA-NP, Redstone Arsenal, AL 35898-5230. A reply will be furnished to you. You may
also send in your comments electronically to our e-mail address:
ls-
lp@redstone.army.mil or by FAX (256) 842-6546/DSN 788-6546.
Paragraph
Page
IDENTIFICATION AND DESCRIPTION
Test instrument identification ...................
Forms, records, and reports.......................
Calibration description...............................
EQUIPMENT REQUIREMENTS
Equipment required...................................
Accessories required..................................
CALIBRATION PROCESS
Preliminary instructions............................
Equipment setup .......................................
Dc voltage .................................................
Ac voltage..................................................
Resistance .................................................
Final procedure .........................................
______________
This bulletin supersedes TB 9-6695-294-50, dated 28 May 1991, which has been rescinded.
