TB 9-5210-219-40
EQUIPMENT REQUIREMENTS
calibration procedure. This equipment is issued with Secondary Reference Calibration
Standards Set, NSN 4931-00-621-7878. Alternate items may be used by the calibrating
activity. The items selected must be verified to perform satisfactorily prior to use and must
bear evidence of current calibration. The equipment must meet or exceed the minimum use
between the standard and TI. Where the four-to-one ratio cannot be met, the actual
accuracy of the equipment selected is shown in parenthesis.
5. Accessories Required. The accessories required for this calibration are common
usage accessories issued as indicated in paragraph 4 above, and are not listed in this
calibration procedure. The following peculiar accessories are also required for this
calibration: POWER SUPPLY, Elgar, model DCS4-30EM10 and INDEX TABLE, Moore
Precision Tools, model ATS-21E10-S.
Table 2. Minimum Specifications of Equipment Required
Manufacturer and model
Common name
Minimum use specifications
(part number)
1
ANGLE BLOCKS
Range:
N/A
L. S. Starrett, Model AG18TR
Accuracy: 0.8 arc-sec
90 o
ANGLE PLATE
Range:
Taft-Pierce, Model 9193
Accuracy: Square within
0.0003 in/8 in.
GAGE BLOCKS1
Range:
N/A
(7901961)
Accuracy: 0.00005 in.
2
Range:
0 to 100 VDC
Hewlett Packard, Model 3458A
Accuracy: (10 ppm of ind
(3458A)
+0.3 ppm of range)
PRECISION LEVEL
Range:
N/A
(7916928)
Accuracy: 30 arc-sec
SINE PLATE
Size:
10 in
Robbins Engineering, Model A10
o
Range:
0 to 45
Accuracy: 30 sec (angle)
SURFACE PLATE
Range:
18" x 24"
DoAll Mfg. Co., 18 x 24-in.
Accuracy: N/A
(7900123)
1 Only for use in alternate method
2 Only required to calibrate TI sensor without angle display
