Figure 6. Trigger level adjustment

TB 9-6625-2071-35

Figure 6. Trigger level adjustment - equipment setup.

(8) Move oscilloscope Vertical 1 connection from TI CHANNEL A MARKER

OUTPUT to TI CHANNEL B MARKER OUTPUT.

(9) Adjust oscilloscope controls as necessary to view waveform. Adjust A11R20

(fig. 1) for a 50 percent duty cycle on oscilloscope display (R).

(10) Execute TI command string PF4G6S1S3A379+200*B37+200*R.

(11) Set function generator Offset to +2 V dc.

(12) Adjust resistance standard and function generator offset until multimeter

indicates +2.000 V dc 0.002 V dc.

(13) Adjust oscilloscope controls as necessary to view waveform. Adjust A11R18

(fig. 1) for a 50 percent duty cycle on oscilloscope display (R).

(14) Move oscilloscope Vertical 1 connection from TI CHANNEL B MARKER

OUTPUT to TI CHANNEL A MARKER OUTPUT.

(15) Adjust oscilloscope controls as necessary to view waveform. Adjust A11R24

(fig. 1) for a 50 percent duty cycle on oscilloscope display (R).

CHANGE 1 15

Privacy Statement
Press Release
Contact