TB 9-6625-2155-35
h. Replace TI top cover.
workstation.
8. Display Resolution and Accuracy
a. Performance Check
(1) Connect the local oscillator 10 MHz REF OUT to the measuring receiver TIME
BASE 10 MHz INPUT.
(2) Connect TI 10 MHz OUT (rear panel) to the local oscillator 10 MHz REF IN
connector.
(3) Finish connection as shown in figure 2.
(4) Press TI keys as listed in (a) through (f) below.
(a)
RCL 0.
(b)
Adjust OUTPUT LEVEL for 0 dB.
(c)
ALC INTERNAL on.
(d)
RF OUTPUT on.
(e)
FREQ INCR, 1, kHz.
(f)
FREQUENCY, 4, GHz.
(5) Set local oscillator and measuring receiver to measure 4 GHz, using the local
oscillator, and measuring receiver offset frequencies listed in table 3.
