TB 9-6625-2155-35
(2) Press TI keys as listed in (a) through (e) below.
(a)
RCL 0.
(b)
Adjust OUTPUT LEVEL for 8 dB.
(c)
ALC INTERNAL on.
(d)
RF OUTPUT on.
(e)
FREQUENCY, 5, ., 9, 9, 9, GHz.
(3) Set spectrum analyzer as listed in (a) through (f).
(a)
Preset.
(b)
AMPLITUDE, Ref Level to 8 dBm.
(c)
All markers off.
(d)
(e)
BW, Video BW, and Res BW to Auto.
(f)
SPAN to 1 MHz.
(4) Allow spectrum analyzer to sweep signal a couple of times then set spectrum
analyzer as listed in (a) through (c) below:
(a) FREQUENCY, Signal Track to On.
(b) SPAN to 2.5 kHz.
(c) BW/Avg, Video BW to 10 Hz.
(5) Allow spectrum analyzer to sweep signal for approximately 50 seconds then set
spectrum analyzer as listed in (a) through (d) below.
9
