TB 9-6625-2296-24
NOTE
Random numbers may be displayed as test is running. The
testing process can be halted by pressing the STOP key
anytime during the testing process. If a test fails, the
Diagnostic Menu appears. The operator can view the Test
Results of the failed test (Disp (F3)), perform a Debug
Operation on the failed test (Debug (F2)), retest failed test
(Cont (F1)) or retest from the beginning of the testing process
(Restart (F6)).
(13)Rtn (F6) ..........................................
Return to SINCGARS Verification Test
Menu
NOTE
Attach Test Fixture TF-119A to the UUT Connector on the
PL-1536/GRM.
(14)BIT 2 (F3) .......................................
BIT Level 2 Test
(15)GO ....................................................
BIT Level 2 Test begins
NOTE
If a test fails, the Diagnostic Menu appears. The operator can
view the Test Results of the failed test (Disp (F3)), perform a
Debug Operation on the failed test (Debug (F2)), retest failed
test (Cont (F1)) or retest from the beginning of the testing
process (Restart (F6)).
v. Remove Test Fixture TF-119A and proceed to jj below.
w. Press key sequence listed in (1) through (13) below:
(1) MODE MTRS .................................
Meters Menu
(2) AUX (F6) .........................................
Auxiliary
(3) MEMORY RCL ..............................
Recall
(4) FIELD SELECT .........................
Highlight 10. Factory Defaults
(5) DATA ENTRY ENTER .................
Factory Defaults recall
NOTE
Assure highlighted area indicates YES before proceeding.
(6) DATA ENTRY ENTER .................
Factory Defaults restored
(7) MODE RCVR .................................
Receiver Mode
(8) More (F6) ........................................
Until Sp Tst (F5) appears
12
