*TB 9-6625-2329-35
DEPARTMENT OF THE ARMY TECHNICAL BULLETIN
CALIBRATION PROCEDURE FOR
SIGNAL GENERATOR
ROHDE AND SCHWARZ, MODEL 801.0001.43
Headquarters, Department of the Army, Washington, DC
5 May 2005
Distribution Statement A: Approved for public release; distribution is unlimited.
REPORTING OF ERRORS AND RECOMMENDING IMPROVEMENTS
You can improve this manual. If you find any mistakes or if you know of a way to improve
these procedures, please let us know. Mail your letter or DA Form 2028 (Recommended
Changes to Publications and Blank Forms) directly to Commander, US Army Aviation and
Missile Command, ATTN: AMSAM-MMC-MA-NP, Redstone Arsenal, AL 35898-5000. A reply
will be furnished to you. You may also provide DA Form 2028 information to AMCOM via e-
mail, fax, or the World Wide Web. Our FAX number is: DSN 788-6546 or Commercial 256-
842-6546. Our e-mail address is: 2028@redstone.army.mil. Instructions for sending an
electronic 2028 may be found at the back of this manual. For the World Wide Web, use:
https://amcom2028.redstone.army.mil.
Paragraph
Page
IDENTIFICATION AND DESCRIPTION
Test instrument identification ......................
Forms, records, and reports ..........................
Calibration description..................................
EQUIPMENT REQUIREMENTS
Equipment required.......................................
Accessories required ......................................
CALIBRATION PROCESS
Preliminary instructions ...............................
Equipment setup............................................
Frequency accuracy .......................................
RF output and flatness ..................................
Attenuation ....................................................
Spectral purity ...............................................
Modulation generator ....................................
Amplitude modulation...................................
Phase modulation ..........................................
Frequency modulation ...................................
Pulse modulation ...........................................
Final procedure ..............................................
_________
*This bulletin supersedes TB 9-6625-2329-35, dated 27 November 2002.
