TB 9-6625-2337-35
(h) Use the arrow keys to highlight POWER:.
(i) ENTR.
(27) Verify that the TI POWER indication is within .5 db of the value recorded in
(23) above.
(28) Use the arrow keys to highlight FREQUENCY: and press the ENTR key.
(29) Verify that the TI FREQUENCY indication is between 29.99 and 30.01 MHz.
(30) Set the signal generator to produce a 1200 MHZ +10 dB cw output and turn the
RF OUTPUT off.
(31) Repeat technique of (20) through (28) above for 1200 MHz, and verify that the
TI FREQUENCY indication is between 1199.76 and 1200.24 MHz.
(32) Turn signal generator RF OUTPUT to off.
(33) Press TI keys as listed in (a) through (z) below:
Press FUNC, ↑.
(a)
(b)
2, ENTR (CHALLENGES).
(c)
Use the arrow keys to highlight M2:.
(d)
ENTR (OFF).
(e)
Use the arrow keys to highlight M4:.
(f)
ENTR (WORD C).
Press FUNC, ↑.
(g)
(h)
15, ENTR (SUPPRESSION).
(i)
Use the arrow keys to highlight SUPPRESSION GATE:.
(j)
ENTR, (OFF).
Press FUNC, ↑.
(k)
(l)
14, ENTR (PRF/PRI).
Use the arrow keys to highlight PRF:.
(m)
(n)
4000, ENTR (4000 PPS).
Press FUNC, ↑.
(o)
(p)
5, ENTR (TIMING, VIDEO LEVELS).
(q)
Use the arrow keys to highlight MIXED VIDEO:.
(r)
5, ENTR (5.0V).
Press FUNC, ↑.
(s)
(t)
7, ENTR (MIXED VIDEO).
(u)
Use the arrow keys to highlight OUTPUT PW:.
(v)
ENTR, (VARIABLE).
(w)
Use the arrow keys to highlight VAR PW:.
1, ENTR (1.00S).
(x)
(y)
Use the arrow keys to highlight DEMOD:.
(z)
ENTR, (OFF).
(34) Disconnect TI from signal generator.
(35) Connect signal generator OUTPUT to peak power meter channel A through
cable 57057ASSY8190001616-1 and N type feedthrough.
54
