TB 9-4920-467-24
Table 1. Calibration Description Continued.
Test instrument parameters
Performance specifications
Vc_DC
Output Level: = Vt
Vc Sim 0%Q
Accuracy
0.0005 V dc
Vc_DC
Output Level: = Vt 0.044 V dc
Vc Sim 10%Q
Accuracy
0.008 V dc
Vc_DC
Output Level: =Vt 0.444 V dc
Vc Sim 100%Q
Accuracy
0.008 V dc
Sec_AC
Output Level: 10.5 V ac
Vt and Vc Secondary Stimulus
Frequency:
6 kHz
Accuracy
2.0 V ac
EQUIPMENT REQUIREMENTS
calibration procedure. This equipment is issued with Secondary Transfer Calibration
Standards Set, AN/GSM-286; AN/GSM-287; or AN/GSM-440. Alternate items may be used
by the calibrating activity. The items selected must be verified to perform satisfactorily
prior to use and must bear evidence of current calibration. The equipment must meet or
provide a four-to-one ratio between the standard and TI. Where the four-to-one ratio
cannot be met, the actual accuracy of the equipment selected is shown in parentheses.
5. Accessories Required. The accessories required for this calibration are common
usage accessories, issued as indicated in paragraph 4 above, and are not listed in this
calibration procedure. The following peculiar accessory is also required for this calibration:
Ultrax UxValidator, Series 2, PN 10-0210-02.
Table 2. Minimum Specifications of Equipment Required.
Manufacturer and model
Common name
Minimum use specifications
(part number)
CALIBRATOR1
Dc voltage: Range:
0 to 20 V
Fluke, Model 5720A (5720A) (p/o
Accuracy:
100 V
MIS-35947); w/ amplifier, Fluke
Ac voltage: Range:
0 to 60 V
5725A/AR (5725A/AR)
Frequency: 6 kHz
Accuracy:
0.25 V
Current:
Range:
0 to 0.5 A
Frequency: 6 kHz
AC:
Accuracy
AC A: 1.0 % of
reading + 200 A)
Range:
0-20 V dc
Agilent, Model 3458A (3458A)
Accuracy: 20 V
10 mΩ to 33 kΩ
Range:
IET Labs, HARS-LX-9-0.001
Accuracy: (0.05 Ω)
STANDARD1
(HARS-LX-9-0.001)
1 Two required.
