TB 9-6625-149-50
NOTE
When measuring high currents, do not leave current probe
connected around conductor while connecting or disconnecting
probe from TI.
(3) Clamp TI around one lead (B6).
NOTE
Be sure that slide probe is all the way forward.
(4) Turn TI CURRENT/DIV. switch to 1 mAMP.
(5) Turn oscilloscope VOLTS/CM switch to .1.
(6) Record amplitude of waveform displayed on oscilloscope.
(7) Turn TI CURRENT DIV. switch to 2 mAMP.
(8) Turn oscilloscope VOLTS/CM switch to .05. If amplitude of waveform is not the
same as recorded in (6) above, perform b below.
19
