TB 9-6625-149-50
27. Rise Time and High Frequency Compensation
a. Performance Check
(1) Replace left side cover on TI.
(2) Connect equipment as shown in figure 5.
(3) Turn TI CURRENT/DIV. switch to 5 mAMP.
(4) Turn oscilloscope (A7) VOLTS/CM switch to .05.
(5) Adjust square-wave generator (A9) until oscilloscope displays waveform 2
centimeters high at approximately 500 kHz.
Figure 5. Rise time and high frequency - equipment setup.
21
